![[Under Construction]](images/undercon.gif)
SHAKE2000
On-Line References
A 2-D Seismic Stability and Deformation Analysis 
A closer look at Arias intensity-based liquefaction
evaluation procedures
A comprehensive worldwide summary of strong-motion
attenuation relationships for peak ground acceleration and spectral ordinates (1969 to
2000)
A comprehensive worldwide summary of strong-motion
attenuation relationships for peak ground acceleration and spectral ordinates (1969 to
2000) – Errata and additions
A methodology for seismic microzonation using GIS and
SHAKE – A case study from Armenia, Colombia
A Practical Reliability-Based Method for Assessing
Soil Liquefaction Potential
A proposed Geoindex Model for design selection of
non-linear properties for site response analyses
A study on probabilistic evaluation of soil
liquefaction
A web-based platform for computer
simulation of seismic ground response
Accuracy of Response of Single-Degree-of-Freedom
Systems to Ground Motion
Amplification Factors for Spectral Acceleration in
Active Regions
Amplification of Seismic Waves by the Seattle Basin,
Washington State
An Energy-Based Excess Pore Pressure Generation Model
for Cohesionless Soils
An Update of the Seed-Idriss Simplified Procedure for
Evaluating Liquefaction Potential
Analyses of Strong Motion Earthquake Accelerograms
Application of "Equivalent Linear Analysis Method
Taking Account of Frequency Dependent Characteristics of Ground Strain" to Seismic
Data from Lotung, Taiwan
Assessing the Seismic Hazard in Charleston, South
Carolina: Comparisons Among Statistical Models
Assessment of Earthquake Hazard in Turkey and
Neighboring Regions
Characterization of Liquefaction Resistance in
Gravelly Soil: Large Hammer Penetration Test and Shear Wave Velocity Approach
Characterization of Site Response General Site
Categories
Characterization of the Uncertainty of the Robertson
and Wride Model for Reliability Analysis of Soil Liquefaction
Characterizing and Quantifying Earthquake-Induced Site
Nonlinearity
Comparing Liquefaction Evaluation Methods Using
Penetration-Vs Relationships
Comprehensive Seismic Risk and Vulnerability Study for
the State of South Carolina
Comprehensive Specification for the Seismic Design of
Bridges – NCHRP Report 472
Computations of Seismic Hazard
Conditional Simulation of Spatially Correlated
Earthquake Ground Motion
Considerations of Site Response in U.S. Building Code
Provisions
CPT-Based Probabilistic Assessment of Seismic Soil
Liquefaction Initiation
Criteria for Seismic Ground Motions for Essential
Structures
Cyclic Soil Plasticity
Deaggregation of U.S. Seismic Hazard Sources: The 2002
Update
Design Guidance: Geotechnical Earthquake Engineering
for Highways – Volume I – Design Principles
Design Guidance: Geotechnical Earthquake Engineering
for Highways – Volume II – Design Examples
Deterministic seismic hazard analysis in northwest
Oregon, U.S.A.
Development of a New Family of Normalized Modulus
Reduction and Material Damping Curves
Development of a New Family of Normalized Modulus
Reduction and Material Damping Curves – Thesis
Development of a Simplified Reliability-Based Method
for Liquefaction Evaluation
Development of Design Response Spectral Shapes for
Central and Eastern U.S. (CEUS) and Western U.S. (WUS) Rock Site Conditions
Development of Regional Hard Rock Attenuation
Relations for Central and Eastern North America, Mid-Continent and Gulf Coast Areas
Development of Regional Hard Rock Attenuation
Relations for South Carolina
Development of Regional Hard Rock Attenuation
Relations for Central and Eastern North America
Development of Seismic Ground Motions at Four Bridges
in the State of Illinois
Development of Self Consistent Regional Soil
Attenuation Relations for Ground Motions and Liquefaction Parameters; and Example for the
Basin and Range Region
DMG 117 – Guidelines for Evaluating and
Mitigating Seismic Hazards in California
DMG 118 – Recommended Criteria for Delineating
Seismic Hazard Zones in California
Documentation and Analysis of Field Case Histories of
Seismic Compression during the 1994 Northridge, California,
Earthquake
Documentation for the 2002 Update of the National
Seismic Hazard Maps
Documentation of Soil Conditions at Liquefaction and
Non-Liquefaction Sites from 1999 Chi Chi (Taiwan) Earthquake
Does Liquefaction Protect Overlying Structures from
Ground Shaking?
Draft Guidelines for Evaluating Liquefaction
Resistance Using Shear Wave Velocity Measurements and Simplified Procedures
Earthquake Ground Motion for Use in Design in the
United States
Earthquake Hazard Mapping in British Columbia: Status,
Demand and Methodology Development
Earthquake Motion Input and its Dissemination via the
Internet
EM 1110-2-6050 - Response Spectra and Seismic Analysis
for Concrete Hydraulic Structures
EM 1110-1-1804 – Geotechnical Investigations
EM 1110-1-1904 – Settlement Analysis
EM 1110-2-1902 – Slope Stability
EM 1110-2-6051 – Time-History Dynamic Analysis of
Concrete Hydraulic Structures
Engineering Seismology
Equations for Estimating Horizontal Response Spectra
and Peak Acceleration from Western North American Earthquakes: A Summary of Recent Work
Estimating Ka for use in
Evaluating Cyclic Resistance of Sloping Ground
Estimating site-specific strong earthquake motions
Estimation of Non-Linear Seismic Site Effects for Deep
Deposits of the Mississippi Embayment
Estimation of Uncertainty in Geotechnical Properties
for Performance-Based Earthquake Engineering
Evaluating Liquefaction Resistance at High Overburden
Stresses
Evaluating the Potential for Liquefaction or Cyclic
Failure of Silts and Clays
Evaluation of CPT Liquefaction Analysis Methods
Against Inclinometer Data from Moss Landing
Evaluation of Geotechnical Design Parameters Using the
Seismic Piezocone
Engineering Evaluation of Post-Liquefaction Residual
Strengths
Evaluation of Seismic Hazards
Evaluation of Seismic Stability of Tailings Dams
Evaluation of Soil and Rock Properties –
Geotechnical Engineering Circular No. 5
Evaluation of Soil Liquefaction in the Chi-Chi, Taiwan
Earthquake Using CPT Data
Evolution of Dynamic Analysis in Geotechnical
Earthquake Engineering
Evolution of Soil Models Since the 1970s
Factors of Safety and Reliability in Geotechnical
Engineering
Geotechnical Analysis of Paleoseismic Shaking using
Liquefaction Features: Part I Major Updating of Techniques for Analysis
Geotechnical Aspects of the Earthquake Ground Motions
Recorded During the 1999 Chi-Chi Earthquake
Geotechnical Earthquake Engineering for Highways
– Reference Manual – Updated Chapters 4 & 8
Ground Failure During Earthquakes
Ground Motion Amplification of Soils in the Upper
Mississippi Embayment
Ground Motion Estimation Equations 1964-2003
Ground Motion Evaluation Procedures for
Performance-Based Design
Ground motion in Anchorage, Alaska, from the 2002
Denali fault earthquake: Site response and displacement pulses
Ground Motions and Liquefaction – The Loading
Part of the Equation
Ground-Motion Relations for Earthquakes in the Pacific
Northwest: Crustal, In-Slab and Offshore Events
Guide for the Use of the International System of Units
(SI)
Guidelines for Use of the Consequence Hazard Matrix
and Selection of Ground Motion Parameters
Influence of Soil Softening and Liquefaction on
Response Spectra for Bridge Design
Integration of Probabilistic Seismic Hazard Analysis
with Nonlinear Site Effects and Application to the Mississippi Embayment
Lessons Learned and Need for Instrumented Liquefaction
Sites
Liquefaction-induced Ground Deformation and Failure
Liquefaction of Silts and Silt-Clay Mixtures
Liquefaction Potential Assessment – Examples
Liquefaction Resistance Based on Shear Wave Velocity
Magnitude Scaling of the Forward Rupture Directivity
Pulse in Near-Fault Ground Motions
Manual on Subsurface Investigations –
Geotechnical Site Characterization – FHWA NHI-01-031
Modeling non-linear ground response of non-liquefiable
soils
Modeling Soil Liquefaction Hazards for
Performance-Based Earthquake Engineering
Modification of the Toro et al. (1997) Attenuation
Equations for Large Magnitudes and Short Distances
NEHRP Recommended Provisions for Seismic Regulations
for New Buildings and Other Structures – Part 1: Provisions
NEHRP Recommended Provisions for Seismic Regulations
for New Buildings and Other Structures – Part 2: Commentary
New Madrid Seismic Zone: Overview of Earthquake Hazard
and Magnitude Assessment Based on Fragility of Historic Structures
New seismic design spectra for nuclear power plants
Newmark Seismic Deformation Analysis for Geosynthetic
Covers
Non-Linear Seismic Site Response of Deep Deposits in
West Tennessee
Nonlinear Site Response Analysis of Submerged Slopes
Nonlinear Site Response and its Evaluation and
Prediction
Nonlinear Soil Properties and their Use in Dynamic
Analysis
On Pads and Filters: Processing Strong-Motion Data
Practical Use of Geotechnical Site Response Models
Probabilistic Methods in Geotechnical Engineering
Probabilistic Seismic Demand Analysis: Spectrum
Matching and Design
Probabilistic Seismic Hazard Analysis (PSHA) – A
Primer
Probabilistic Seismic Hazard Maps of Alaska
Probability Analysis of Slope Stability
Processing of Strong-Motion Accelerograms: Needs,
Options and Consequences
Random Field Modeling of CPT Data
Ranking and Assessment of Seismic Stability of Highway
Embankments in Kentucky
Rapid Calculation of Selected Fourier Spectrum
Ordinates
Reappraisal of the effect of vertical ground motions
on response
Recent Advances in Soil Liquefaction Engineering: A
Unified and Consistent Framework
Record Selection for Nonlinear Seismic Analysis of
Structures
Relating ka and ks to SPT Blow Count and to CPT Tip Resistance for Use in Evaluating
Liquefaction Potential
Relative Liquefaction and Amplification of Ground
Motion Hazard Maps of Greater Victoria
SCDOT – Seismic Design Specification for Highway
Bridges
Scenario Earthquakes for Saint Louis, MO, and Memphis,
TN, and Seismic Hazard Maps for the Central United States Region Including the Effect of
Site Conditions
SEA99: A Revised Ground Motion Prediction Relation for
Use in Extensional Tectonic Regimes - Erratum
Seismic Compression: Effects on Lifelines and Updated
Analysis Method
Seismic Compression of As-Compacted Fill Soils with
Variable Levels of Fines Content and Fines Plasticity
Seismic Criteria for California Marine Oil Terminals
Seismic Deformation Analysis of Earth Dams: A
Simplified Method
Seismic Design Criteria for Soil Liquefaction
Seismic Hazard Analysis for Montreal
Seismic Response of Statistically Varied Soil Column
Profiles for SSI Analyses
Seismic Response Simulation of Geostructures in Mid
America: A Consequence Based Engineering Approach
Seismic Stability of Impoundments
Seismological Criteria for Selecting and Scaling Real
Accelerograms for Use in Engineering Analysis and Design
Selection and Scaling of Ground Motion Time Histories
for Structural Design Using Genetic Algorithms
Semi-Empirical Procedures for Evaluating Liquefaction
Potential During Earthquakes
Simplified Seismic Design Procedure for
Geosynthetic-Lined, Solid-Waste Landfills
Site Response Analysis at the Vertical Arrays of the
Cerritos College Police Station and San Bernardino Main Fire Station
Site Response of Organic Soils
Site Response of Organic Soils in the Delta
Site Response Studies in Victoria, B.C., Analysis of Mw
6.8 Nisqually Earthquake Recordings and SHAKE Modeling
SMSIM – Fortran Programs for Simulating Ground
Motions from Earthquakes
Software Framework for Collaborative Development of
Nonlinear Dynamic Analysis Program
Soil Liquefaction Response in Mid-America Evaluated by
Seismic Piezocone Tests
Soil Nonlinearity versus Frequency Effects
Spatial Variation in Liquefaction Risk
State Normalization of Penetration Resistance and the
Effect of Overburden Stress on Liquefaction Resistance
Static Liquefaction of Tailings – Fundamentals
and Case Histories
Strong Motion Record Processing for the PEER Center
Structural Response Amplification due to Soft Soil
Effects and the Effectiveness of the NBCC 2005 in Accounting for these Effects
The Cascadia Subduction Zone and Related Subduction
Systems
The Current Limitations of Displacement Based Design
The Effects of Non-Plastic and Plastic Fines on the
Liquefaction of Sandy Soils
The influence of ground motion characteristics on site
response coefficients
Uncertainties in Site Response Modeling: A
Practitioner’s Perspective
Uncertainty Analysis of Strong Ground Motion
Uncertainty and Bias in Ground Motion Estimates from
Ground Response Analyses
Uncertainty Modeling in Earthquake Engineering
U.S. National Report on CPT
Validation of One-Dimensional Site Response
Methodologies
Which spectral acceleration are you using?